Universal Transducer / Speed Pulse Generator
Special Price Please call us on +44 (0)1386 554 210 for more details
When involved in fitting retrofit on-board electronic equipment to vehicles, a problem arises in that the correct transducer is not always available in stock. The Hunter universal tranducer, supplied with end fitting kit, overcomes this problem. It can be used when speedo or gearbox fitting of custom-made transducers is not possible. With one crimping tool the whole job can be completed with speedo cable in situ by semi-skilled labour. The transducer will accommodate both commonly used size inner drive cables and the different size outer cables.
Benefits: Save valuable labour time. Cut down on stock inventory. Able to give instant service. Self lubricated cable entry clamped and sealed against water ingress. Lightweight, no supporting brackets required
PLEASE NOTE: THE FITTING OF THE UNIVERSAL TRANSDUCER CAN ONLY BE INSTALLED CORRECTLY USING OUR CP101 CRIMPING PLIERS, SPECIFICALLY DESIGNED FOR THIS PURPOSE. USE OF OTHER CRIMPING TOOLS WILL INEVITABLY MEAN THAT AN UNSATISFACTORY PERFORMANCE WILL BE ACHIEVED.
The Hunter universal transducer is designed to operate in-line with commonly used automotive speedo cables. The full range of custom made transducers do require the cutting of the speedo cable, they simply fit directly into the speedo cable drive.
It is essential when crimping the ferrule to the outer cable that there is a space between the rear face of the brass drive pin and the cut end of the outer cable.
NOTE: Any rubbing of the rear face of the adaptor and the cut end of the outer cable will cause speedo flickering and eventually inner cable failure.