CB2BMWMB CAN Bus Interface
Overview
Overview
- Small design for easy installation, approx size: 52x30x9mm
Part no: CB2BMWMB
Simply connect and go, no complicated programming required.
The CB2BMWMB CAN Bus interface is designed to provide a vehicle speed pulse signal (VSS) and engine speed signal (RPM) from the BMW (K1) Motorbike using a CAN Bus system.
Features built-in diagnostic LEDs to indicate CAN Bus status.
Vehicle Coverage
Vehicle Coverage
- BMW - (K1) Motorbike
Wire Colours
Wire Colours
| Colour | I/O | Function |
|---|---|---|
| Black | I | Ground |
| Red | I | Power +12V regulated ignition controlled supply |
| Yellow | I | CAN High |
| Blue | I | CAN Low |
| Orange | O | Speed Pulse Output 12V |
| Green | O | RPM |
Output
Output
| Frequency | Approx. 1Hz per mph |
| Output voltage | 12V square wave |
| Minimum speed | 1.7mph |
| Approx. pulse/mile | 3600 |
| Engine speed | 2 pulses per revoluion |
Function
Function
The CB2BMWMB CAN Bus interface is designed to provide a vehicle speed signal and RPM signal for the BMW (K1) Motorbike, using a CAN Bus system. It is programmed to automatically detect the vehicle type and it will give a frequency output of approximately 1Hz per mph.
