CB1BMWMB CAN Bus Interface

Overview

Overview

Small design for easy installation, approx size: 52x30x9mm

Part no: CB1BMWMB

Simply connect and go, no complicated programming required.

The CB1BMWMB CAN Bus interface is a simple signal output device for obtaining a vehicle speed pulse signal (VSS) from a BMW (K1) motorbike using a CAN Bus system.

Features built-in diagnostic LEDs to indicate CAN Bus status.

 

Vehicle Coverage

Vehicle Coverage

 

  • BMW - (K1) Motorbike 

To top

Wire Colours

Wire Colours

Colour I/O Function
Black I Ground
Red I Power +12V regulated ignition controlled supply
Yellow I CAN High
Blue I CAN Low
Orange O Speed Pulse Output 12V

Output

Output

Frequency Approx. 1Hz per mph
Output voltage 12V square wave
Minimum speed 1.7mph
Approx. pulse/mile 3600

Function

Function

Click on image to enlarge

The CB-1 CAN Bus interface is designed to provide a vehicle speed signal for the BMW (K1) motorbike, using a CAN Bus system.  It is programmed to automatically detect the vehicle type and it will give a frequency output of approximately 1Hz per mph.

The CANClick allows CAN enabled devices to be installed without any warranty issues as there is no physical connection...

The CB-1 CAN Bus interface is designed to provide a vehicle speed signal for vehicles using a CAN Bus system. It is...

The CB-1 CAN Bus interface is designed to provide a vehicle speed signal for vehicles using a CAN Bus system. It is...

The CB-1 CAN Bus interface is designed to provide a vehicle speed signal for vehicles using a CAN Bus system. It is...

The CB-1 CAN Bus interface is designed to provide a vehicle speed signal for BMW Motorbike vehicles using a CAN Bus...

The new CB2BMWMB CANBus interface is designed to provide a vehicle speed pulse signal (VSS) and engine speed signal...

The new CB-2 CANBus interface is designed to provide a vehicle speed pulse signal (VSS) and engine speed signal (RPM)...

The CB2OBD is designed to provide a vehicle speed & RPM from vehicles with an OBDII connector

The CB2M200 CANBus interface is designed to provide a vehicle speed pulse signal (VSS) and engine running from...

The CB1PK CAN interface provides a speed switch negative output, which will de-activate/activate front parking sensors...

The CB2PK CAN interface provides a speed switch negative output, which will de-activate/activate front parking sensors...

The NEW CB-6 CAN Bus interface is a versatile multi output device for obtaining vehicle speed pulse, engine speed,...

The CB6M100 CAN Bus interface is a versatile multi output device for obtaining vehicle speed pulse, engine speed,...

The CB8-R Hunter CAN Bus Interface is a multi output device for obtaining vehicle speed pulse (VSS), engine speed,...

The CB-Park interface provides a solution to the problem of de-activating/activating front parking sensors when a...

The SCPTRAN2 Interface uses the Standard Corporate Protocol (SCP), defined by Ford, to request engine speed and road...

The CB7 is designed to read vehicle speed and engine speed data from Ford vehicles equipped with SCP Bus. The Bus is...