CB-2 CANBus Interface

Overview

Overview

Small design for easier installation, approx size: 52x30x9mm

Part no: CB-2

Simply connect and go, no complicated programming required.

The new CB-2 CAN Bus interface is designed to provide a vehicle speed pulse signal (VSS) and engine speed signal (RPM) from virtually any vehicle using a CAN Bus system.

The CB-2 is compatible with 40 vehicle manufactures covering 250+ different models, including Commercial vehicles using SAEJ1939.

NEW Landrover Discovery 4 and Jaguar XF included in the latest software 

Features built-in diagnostic LEDs to indicate CAN Bus status.

Application

Application

Cruise Control - Fleet Management - Motability - Speed limiters

Function

Function

The CB-2 CAN Bus interface is designed to provide a vehicle speed signal and RPM signal for vehicles using a CAN Bus system.  It is programmed to automatically detect the vehicle type and it will give a frequency output of approximately 1Hz per mph.

The CB-1 CAN Bus interface is designed to provide a vehicle speed signal for vehicles using a CAN Bus system. It is...

The new CB-2 CANBus interface is designed to provide a vehicle speed pulse signal (VSS) and engine speed signal (RPM)...

The CB2PK CAN interface provides a speed switch negative output, which will de-activate/activate front parking sensors...

The NEW CB-6 CAN Bus interface is a versatile multi output device for obtaining vehicle speed pulse, engine speed,...

The CB8-R Hunter CAN Bus Interface is a multi output device for obtaining vehicle speed pulse (VSS), engine speed,...

The CB-Park interface provides a solution to the problem of de-activating/activating front parking sensors when a...

The SCPTRAN2 Interface uses the Standard Corporate Protocol (SCP), defined by Ford, to request engine speed and road...

The CB7 is designed to read vehicle speed and engine speed data from Ford vehicles equipped with SCP Bus. The Bus is...